MGK Pressurized Grease Injector Metering Valves Series MG

Metering valve series MGK is part of a pressure relief single-line grease lubrication system. These distribution valves are designed to provide precise lubrication control for a variety of industrial applications. They are accurate in output, flexible in assembly, stable and durable.

Mô tả

Tính năng

Precise Lubrication Control: Distribution valves afford accuracy of discharge volume in a range of 0.03 mL to 0.5 mL for good lubrication.
Connection Methods: Distribution valves are offered with different connection methods: bushing, nut, one-touch connections, among others-that are easily adapted to the setup one is working on.
Durable Material: The valve bodies are of brass to make them strong and noncorrosive.
High Working Pressure: Distribution valves can bear working pressure from at least 1.2 MPa; thus, they are suitable for high-pressure applications.
Low Return Pressure: The return pressure is 0.5 MPa. This contributes toward the effectiveness of the system.
Compact Design: The dimensions are varied to fit various machinery and equipment.

Đặc điểm kỹ thuật

Nguyên lý chức năng Van đo áp suất giảm áp
Số lượng cửa hàng 1~12
Đo lường số lượng 0,03, 0,05, 0,13, 0,20, 0,30, 0,50mL/chu kỳ
Chất bôi trơn Mỡ bôi trơn NLGI 000#, 00#.
Nhiệt độ hoạt động -20 to +80 °C
Áp suất hoạt động 0,5~1,5MPa
Vật liệu Copper, aluminum
Ổ cắm kết nối Đầu vào Rc1/8, Đầu ra Φ4(Rc1/8)
Phụ kiện ổ cắm Kiểu tay áo, Kiểu nhanh
Vị trí lắp đặt Bất kì

Troubleshooting

Check for Blockages: Ensure that there are not any blockages within the metering valve or the piping. Clean any particles or buildup that is probably obstructing the glide.
Verify Connections: Make certain all connections are secure and there are not any leaks. Loose or faulty connections can affect the metering valve’s performance.
Inspect for Wear and Tear: Examine the metering valve for any symptoms of wear and tear, corrosion, or damage. Replace any tired components as needed.
Monitor Pressure Levels: Ensure that the running strain and return stress are within the particular variety. Incorrect strain tiers can cause troubles with lubrication.
Lubrication: Regularly lubricate the metering valve to make sure easy operation and prevent sticking.

Hướng dẫn sử dụng