Customize Pneumatic Micro Lubrication Device For Saw Machine
The MQL (Minimum Quantity Lubrication) system is a device that achieves effective lubrication and cooling by spraying lubricant in the form of atomization or fine spray directly into the processing area, while reducing the large-scale use of traditional coolant.
Mô tả
Tính năng
– Easy to install and maintain: This micro lubrication system is designed for easy installation and maintenance, allowing for less machine downtime.
– Wide range of configuration possibilities: The minimum quantity lubrication system, with its modular design, can be applied to various industrial applications ranging from simple to complex and can be customized according to needs, regardless of lubrication output port or reservoir capacity.
– Strong adaptability: VG 68 machine tool guide oil but also can work together with fluids of different viscosities within the parameter range for different industrial applications.
– Temperature adaptability: This oil mist coolant system is designed to adapt to extreme temperature changes and ensure stability and reliability in different environments within the operating temperature range.
Đặc điểm kỹ thuật
| Supply air pressure | Clean, dry compressed air, 4~7 bar, 708 LPM minimum |
| Pump viscosity | 50~1000 SUS |
| Pump output at full stroke | 0.033mL (1-drop standard), 0.100mL (3-drop standard) |
| Pump output rate | 0~396mL/hr (1-drop standard), 0~1200mL/hr (3-drop standard) |
| Air flow rate | 0~4 SCFM for each air and oil output, 1~2 SCFM typical |
| Pulse generator | 5~50 pulses/min, Max 200pulses/min(not recommended) |
| Nhiệt độ hoạt động | 0℃ ~ +50˚C |
| Storage temperature | (-16℃ ~ +70˚C) |
| Fluid reservoir | Customizable, standard 0.5L, 1.0L, 2L, 4L |
Ứng dụng
– Machining center: In CNC machining centers, the MQL micro-lubrication system replaces traditional emulsion lubrication, reducing waste liquid treatment and environmental protection issues.
- Lathe: On lathes, the MQL system reduces the waste of lubricating oil and cleaning problems caused by a large amount of spray lubrication. Through micro-lubrication, the friction between the tool and the workpiece is reduced, and the cutting efficiency is improved.
– Sawing machine: On sawing machines, the MQL system replaces traditional emulsion lubrication, improves the working environment, and reduces the problems of poor lubrication and tool wear.
– Aluminum and copper processing: The MQL system is used for cutting and sawing of aluminum bars and copper bars, cutting and sawing of various specifications of aluminum and copper ingots, milling of plate ingots, and cutting of profiles after extrusion by extruders. The tool life is extended by 2-3 times, and the processing production efficiency is increased by more than 50%.
