Máy bơm bôi trơn tự động CNC Progressive Graese J100-7C
J100 operates at 24V, 80 bar and a wide temperature range. It has functions such as level monitoring and manual lubrication to reduce downtime. It has a variety of tank specifications and connection methods, flexible installation, and is widely used in many fields.
Mô tả
Đặc trưng
– High metering accuracy, the J100 lubrication pump can measure the amount of fluid grease up to 15mL/min, which can accurately control the lubricant output and ensure stable and reliable lubrication effect.
– The working pressure of the J100 lubrication pump can reach a maximum of 80 bar, which meets the pressure requirements of most lubrication systems and ensures that the lubricant is effectively delivered to the lubrication point.
– The J100 has a liquid level monitoring and early warning function, which can monitor the oil tank or cartridge level in real time, give early warning, and prevent equipment failure due to insufficient lubricant.
– The J100 uses a 24V DC working voltage with low energy consumption, which meets the energy-saving requirements of modern equipment, reduces operating costs, and reduces the impact on the power grid to ensure stable power supply to the system.
– Multiple installation methods, the J100 pump provides maximum installation flexibility through a mounting plate with 4 optional mounting holes.
– Easy operation, the manual lubrication button is used to start or exhaust the lubrication system, and the exhaust screw makes the exhaust process after system startup or cartridge replacement simple and easy, easy for maintenance personnel to operate and equipment debugging.
Đặc điểm kỹ thuật
Người mẫu | J100-7C |
Thời gian bôi trơn | PLC or external controller |
Khoảng thời gian | PLC or external controller |
Nhiệt độ hoạt động | 0℃~ +50°C (Low temperature conditions require antifreeze grease) |
Số lượng cửa hàng | 1 or 2 |
Sức chứa hồ chứa | 0.3L, 0.5L, 0.7L, 1.5L |
Nạp lại | Filling port/removable/cartridge |
Chất bôi trơn | NLGI 000#~2# |
Pressure relief valve | Optional |
Phóng điện | 15 mL/min |
Áp suất vận hành tối đa | 8.0 MPa |
Chủ đề kết nối | Đầu ra Φ6 |
Điện áp hoạt động | 24VDC |
Chứng nhận | Tiêu chuẩn |
Công tắc mức thấp | Liên hệ NC |
Các biện pháp phòng ngừa
– Removing an unused grease cartridge and connecting it to the lubrication pump may cause malfunction due to residual air in the cartridge. Make sure the lubricant is completely consumed before replacement.
– Do not turn on the power with an empty cartridge removed, otherwise the J100 lubrication pump will suck in air or foreign matter, causing it to malfunction.
– When replacing the cartridge, do not wipe around the inlet of the lubrication pump with a dirty cloth, which will cause the lubrication pump to suck in foreign matter and cause it to malfunction.
– Only standard cartridges are supported. Using other grease may cause system malfunction.
– Never inject grease into a used empty cartridge and reuse it, as this may cause the cartridge to rupture or cause the lubrication pump to malfunction due to the entry of air or foreign matter.