MSK Съемный объемный распределитель жидкой масляной смазки
The positive displacement injection valve MSK is a distributor designed for precise thin oil injection. The valve body is usually made of corrosion-resistant brass and is widely used in lubrication systems and manufacturing processes to ensure reliability and long life.
Описание
Особенность
Diverse discharge volume: The MSK series oil distributor can offer diverse discharge volumes from 0.01 to 1.5 ml each stroke, meeting the lubrication needs in different situations.
Working pressure and back pressure: The working pressure of this series oil valve is mainly 1.0MPa, and the back pressure is 0.3MPa to ensure that the distributor can work steadily.
Material: The main body of the MSK series oil distributor is made of brass, which has good corrosion resistance and mechanical properties.
Model and part number: MSK oil distributor offers a variety of models, each model has its corresponding part number, which is convenient for users to choose the appropriate model and order according to their needs.
Maintenance-Friendly: MSK oil distributor is designed for easy assembly and disassembly, making maintenance straightforward and minimizing downtime.
Спецификация
| Принцип действия | Форсунка объемного впрыска |
| Количество торговых точек | 1~12 |
| Количество измеряемых веществ | 0,03, 0,05, 0,13, 0,20, 0,30, 0,50 мл/цикл |
| Смазка | 15-90 сСт при 40℃ |
| Рабочая температура | от -20 до +80 °С |
| Рабочее давление | Минимум 1,0 МПа |
| Материал | Медь, алюминий |
| Соединительная розетка | Вход Rc1/8, Выход Φ4(Rc1/8) |
| Выходная арматура | Тип рукава, Быстрый тип |
| Монтажное положение | Любой |
Установка
Preparation: All the necessary tools and materials should be at hand, including but not limited to the valve, tubing, fittings, sealant, and adapters if applicable.
Mounting: Install the distributor in the desired place, securely fastened and positioned to align with the piping system.
Connecting Tubing: Connect the tubing to the distributor by either compression fittings for some models or push-to-connect fittings for others. Ensure good, sound connections to prevent leakage.
Sealing: Apply a suitable sealant to threaded connections to avoid leakage on installation.
Pressure Testing: After the proper installation, pressure test to check if there are leaks in the installed valve for the correct functionality of it.
Final Adjustments: Finalize all distributor settings and connections to optimize the performance.
