MSK-9 Positive Displacement Injection Thin Oil Distributor
The Positive Displacement Jet Valve MSK is a jet valve used in a variety of industrial applications. It is designed to provide a precise spray of fluid. These valves are used for accurate and reliable fluid delivery, typically in lubrication systems.
Descrição
Recurso
Volume of Various Discharges: Can be availed with a difference in models, the stroke volume ranges from 0.03 to 0.5 ml.
Operate under High Pressures: Operating pressure could be as high as 1.0 MPa.
Quick Reset: Reset pressure is 0.3 MPa, enabling quicker recovery between cycles.
Construction: Distributor made of brass, hence robust and resistant to wear.
Maintenance-Friendly: Easy assembly and disassembly are designed to make maintenance as straightforward as possible, with minimum loss of production.
Corrosion Resistance: Construction materials ensure resistance to corrosion, enabling the valve to last long in adverse environments.
Customizable: The distributor is also available in various sizes and specifications that meet the different needs and requirements of any application.
Especificação
| Princípio de funcionamento | Injetor de deslocamento positivo |
| Números de pontos de venda | 1~12 |
| Quantidade de medição | 0,03, 0,05, 0,13, 0,20, 0,30, 0,50 mL/ciclo |
| Lubrificante | 15-90 CSt a 40℃ |
| Temperatura de operação | -20 a +80 °C |
| Pressão de operação | Mínimo 1,0 MPa |
| Material | Cobre, alumínio |
| Tomada de conexão | Entrada Rc1/8, Saída Φ4(Rc1/8) |
| Conexões de saída | Tipo de manga, tipo rápido |
| Posição de montagem | Qualquer |
Testing
Visual Inspection: Inspect the injector and all of its connections for any signs of damage or leakage.
Pressure Test: Connect the injector to a pressure source and increase the pressure gradually to the operating level of 1.0 MPa. Look for leaks or other abnormalities.
Flow Test: Measure the volume discharged to verify that it falls within the range of 0.03 to 0.5 ml per stroke. This can be accomplished by utilizing a calibrated measuring device.
Reset Test: Check that the injector resets correctly at the set reset pressure of 0.3 MPa.
Operational Test: Run the injector through several cycles to ensure consistency in performance and check for any irregularities in operation.
