Pulverizador de lubrificação de arrefecimento autoescorvante GS para máquinas-ferramentas
GS sprayer uses air compressor as power source, and applies vacuum self-priming principle to make liquid mixed with air through nozzle and atomized, and sprayed to lubrication points such as workpiece, tool or bearing.
Descrição
Características
GS has good cooling effect, and provides lubrication, chip removal, cleaning and other functions to improve production efficiency and processing quality, reduce the loss of mechanical tools, and reduce pollution in the workshop.
1. The sprayer can cool, lubricate and blow away iron chips at one time during the processing.
2. The sprayer can increase the processing speed, save processing time and reduce tool wear.
3. Lubrication can ensure the finishing quality of the workpiece and the best use of the tool.
4. Processing alloy or super-hard materials can also achieve a smooth and high-precision surface.
5. The sprayer has a new tight-fitting pipeline to avoid internal oil leakage and extend the service life.
6. The air volume and coolant on the sprayer can be adjusted to adapt to different processing conditions.
7. There are different fixed pipelines to choose from to facilitate customer installation and fixation.
Especificação
1. Clean liquid must be used.
2. Do not use corrosive liquid.
3. The air source pressure range is 5-7kgf/cm² (related to the atomization gas volume and air pressure)
4. The viscosity of the liquid used is below 68cSt.
5. Application occasions: sawing machines, lathes, grinders, tapping machines, CNC machining centers, punching machines, woodworking machinery and other cutting and processing equipment.
