SMD 250mL Electric Single-Point Lubricator With DIP Switch
SML lubricator can be installed in any mobile, vibrating, underwater, high-altitude or contaminated location, and can also be installed upside down or horizontally. This lubricator is normally a disposable product, but can be refilled up to three times and is easy to dispose of after use.
Description
Features
For applications with changing temperatures, long-distance installation, such as vibration, confined spaces or hazardous environments, SMD is an option.
1. Transparent cover and transparent oil tank facilitate visual inspection.
2. The same drive unit can be used with two capacities, just adjust the 125/250 ml switch. The power supply can be a 24 VDC external power supply or a 3 VDC battery.
3. The discharge speed is independent of temperature and the extrusion pressure is up to 6.5bar.
4. The red-yellow-green LED lights indicate the status of the lubricator.
5. Can be used for close installation directly or connected to a pipe.
6. When the grease is exhausted, replace the cartridge and battery pack.
7. Applications in restricted and hazardous locations where reliability and additional monitoring are required.
Specification
Lubricants: oil or grease ≤ NLGI #2
Reservoir capacity: 125mL and 250mL
Emptying time: 0.5, 1, 3, 6, 9 and 12 months
Discharge range: 0.3~0.8mL/day
Ambient temperature: -20~60℃
Working pressure: maximum 6.5 bar
Connection thread: R1/4
Longest tube: 3m for grease, 5m for thin oil
Protection level: IP65
Battery: SMD1-BAT (2 CR17505 in parallel)
Storage time: 3 years (20℃)
Full oil weight: 600g (125mL), 800g (250mL)
Applications
Rolling and Sliding Bearing Lubrication: These ensure smooth operation for the bearings in the high-risk environment.
Sliding Guide Lubrication: It is done with accuracy to decrease friction and wear.
Open Gear and Rack Lubrication: This keeps the lubrication intact under high pressure and high temperature.
Spindle and Shaft Seal Lubrication: This protects critical mechanical components and extends service life.
Chain lubrication: Prevents chains from rusting and wearing in harsh environments.
Motor lubrication: Especially suitable for electric motors that require precise lubrication quantities.
