MSK-9 Positive Displacement Injection Thin Oil Distributor
The Positive Displacement Jet Valve MSK is a jet valve used in a variety of industrial applications. It is designed to provide a precise spray of fluid. These valves are used for accurate and reliable fluid delivery, typically in lubrication systems.
Beschrijving
Functie
Volume of Various Discharges: Can be availed with a difference in models, the stroke volume ranges from 0.03 to 0.5 ml.
Operate under High Pressures: Operating pressure could be as high as 1.0 MPa.
Quick Reset: Reset pressure is 0.3 MPa, enabling quicker recovery between cycles.
Construction: Distributor made of brass, hence robust and resistant to wear.
Maintenance-Friendly: Easy assembly and disassembly are designed to make maintenance as straightforward as possible, with minimum loss of production.
Corrosion Resistance: Construction materials ensure resistance to corrosion, enabling the valve to last long in adverse environments.
Customizable: The distributor is also available in various sizes and specifications that meet the different needs and requirements of any application.
Specificatie
| Functieprincipe | Positieve verplaatsingsinjector |
| Aantal verkooppunten | 1~12 |
| Meethoeveelheid | 0,03, 0,05, 0,13, 0,20, 0,30, 0,50 ml/cyclus |
| Smeermiddel | 15-90 CSt bij 40℃ |
| Bedrijfstemperatuur | -20 tot +80 °C |
| Bedrijfsdruk | Minimaal 1,0 MPa |
| Materiaal | Koper, aluminium |
| Aansluiting uitlaat | Inlaat Rc1/8, uitlaat Φ4(Rc1/8) |
| Uitlaatfittingen | Mouwtype, Snel type |
| Montagepositie | Elk |
Testing
Visual Inspection: Inspect the injector and all of its connections for any signs of damage or leakage.
Pressure Test: Connect the injector to a pressure source and increase the pressure gradually to the operating level of 1.0 MPa. Look for leaks or other abnormalities.
Flow Test: Measure the volume discharged to verify that it falls within the range of 0.03 to 0.5 ml per stroke. This can be accomplished by utilizing a calibrated measuring device.
Reset Test: Check that the injector resets correctly at the set reset pressure of 0.3 MPa.
Operational Test: Run the injector through several cycles to ensure consistency in performance and check for any irregularities in operation.
