J203 Electric Progressive Lubrication System For Excavator
J203 is an electric progressive lubrication system from Jinpinlub, suitable for a variety of industrial equipment. It is compact, economical, can provide up to 150 lubrication points, supports DC or AC power, and has a maximum working pressure of 350 bar.
Beschrijving
Functies
1. The lubrication pump body has various designs: there are designs with or without follower plates, the follower plates improve the oil absorption capacity, there are various pump components, suitable for different greases, and the design is flexible.
2. Accurate control and monitoring: the control board has rich functions and can accurately adjust the time. Some lubrication pumps are equipped with sensors to monitor the liquid level. Signal processing requires programming to ensure stable operation.
3. Diverse electrical connections: optional voltage, multiple connection methods, depending on the type of lubrication pump, need to follow the standards to ensure safety, and the protection level is related to the components.
4. Good environmental adaptability: temperature affects performance, different lubrication pumps have corresponding requirements, the reservoir design is diverse, different capacities of 2L, 4L, 8L, 15L can be selected, flexible installation, and adaptable to various working conditions.
5. Excellent delivery capacity: the rated delivery rate varies depending on the components and grease, is affected by many factors, can be adjusted, and there are charts to assist calculation and adjustment.
Specificatie
| Bedrijfstemperatuur | (-40°C tot +70°C) |
| Aantal verkooppunten | 1, 2 of 3 |
| Reservoircapaciteit | 2L, 4L, 8L, 15L |
| Bijvullen | Hydraulische smeernippel of van bovenaf |
| Smeermiddel | Vetten van ten minste NLGI-klasse 2, Oliën tot 40 mm²/s (cSt) bij 40° C |
| Beschermingsklasse | IP6K 9K |
| Zuigerdiameter, K5 | 5 mm, ca. 2 cm³/min |
| Zuigerdiameter, (standaard) K6 | 6 mm, ca. 2,8 cm³/min |
| Zuigerdiameter, K7 | 7 mm, ca. 4 cm³/min |
| Max. werkdruk | 350 bar |
| Verbindingsdraad | G1/4 |
| Bedrijfsspanning | 12VDC, 24VDC, 110-240VAC |
Onderhoud
1. Operational specifications
The daily operation of the lubrication system revolves around replenishing grease, triggering additional lubrication, and resetting error messages. There are various ways to replenish grease, and risks such as extrusion of the stirring paddle and injury by spring tension should be prevented during operation.
The triggering and resetting operations are performed with the help of the control circuit board buttons. Troubleshooting should be done before resetting. The new settings will take effect after the power is restarted. The button operations are limited in time and function.
2. Rigorous maintenance
Regularly and comprehensively check the electrical connection, performance, component installation, pressure protection, equipment status, and lubrication conditions of the machinery and the lubrication pump.
Before cleaning the lubrication pump, turn off the power first, use an adapted cleaning agent to eliminate residues, take good protection, and avoid contact with harmful substances.
