MGK Pressurized Grease Injector Metering Valves Series MG
Metering valve series MGK is part of a pressure relief single-line grease lubrication system. These distribution valves are designed to provide precise lubrication control for a variety of industrial applications. They are accurate in output, flexible in assembly, stable and durable.
വിവരണം
ഫീച്ചർ
Precise Lubrication Control: Distribution valves afford accuracy of discharge volume in a range of 0.03 mL to 0.5 mL for good lubrication.
Connection Methods: Distribution valves are offered with different connection methods: bushing, nut, one-touch connections, among others-that are easily adapted to the setup one is working on.
Durable Material: The valve bodies are of brass to make them strong and noncorrosive.
High Working Pressure: Distribution valves can bear working pressure from at least 1.2 MPa; thus, they are suitable for high-pressure applications.
Low Return Pressure: The return pressure is 0.5 MPa. This contributes toward the effectiveness of the system.
Compact Design: The dimensions are varied to fit various machinery and equipment.
സ്പെസിഫിക്കേഷൻ
പ്രവർത്തന തത്വം | പ്രഷർ റിലീഫ് മീറ്ററിംഗ് വാൽവ് |
ഔട്ട്ലെറ്റുകളുടെ എണ്ണം | 1~12 |
അളവ് അളക്കൽ | 0.03, 0.05, 0.13, 0.20, 0.30, 0.50mL/സൈക്കിൾ |
ലൂബ്രിക്കൻ്റ് | NLGI 000#, 00# ഗ്രീസ്. |
പ്രവർത്തന താപനില | -20 മുതൽ +80 ഡിഗ്രി സെൽഷ്യസ് വരെ |
പ്രവർത്തന സമ്മർദ്ദം | 0.5~1.5MPa |
മെറ്റീരിയൽ | ചെമ്പ്, അലുമിനിയം |
കണക്ഷൻ ഔട്ട്ലെറ്റ് | ഇൻലെറ്റ് Rc1/8, ഔട്ട്ലെറ്റ് Φ4(Rc1/8) |
ഔട്ട്ലെറ്റ് ഫിറ്റിംഗ്സ് | സ്ലീവ് തരം, ദ്രുത തരം |
മൗണ്ടിംഗ് സ്ഥാനം | ഏതെങ്കിലും |
Troubleshooting
Check for Blockages: Ensure that there are not any blockages within the metering valve or the piping. Clean any particles or buildup that is probably obstructing the glide.
Verify Connections: Make certain all connections are secure and there are not any leaks. Loose or faulty connections can affect the metering valve’s performance.
Inspect for Wear and Tear: Examine the metering valve for any symptoms of wear and tear, corrosion, or damage. Replace any tired components as needed.
Monitor Pressure Levels: Ensure that the running strain and return stress are within the particular variety. Incorrect strain tiers can cause troubles with lubrication.
Lubrication: Regularly lubricate the metering valve to make sure easy operation and prevent sticking.