700 bar ütésálló nyomásmérő kenőrendszerhez
Az MB700 a kenési rendszer nyomásának pontos mérését és intuitív megjelenítését éri el a nyomásmérő rugalmas elemeinek deformációja, az erőátviteli mechanizmus átalakítása és a mutatók kijelzése révén.
Leírás
Jellemzők
1. The copper material of the connection joint of MB700 pressure gauge is resistant to oxidation, wear and corrosion. Strong sealing, safe and reliable.
2. The pressure gauge has accurate accuracy, complete information, and dual scales, with the inner ring (bar) unit and outer ring (psi) unit.
3. The shell material of the pressure gauge is excellent, and the stainless steel material has strong corrosion resistance, preventing rust corrosion.
4. The MB700 pressure gauge is a liquid filled instrument that is anti vibration, stable, and accurate.
Specifikáció
| Modell | Bár | Szélesség | Hossz | Írja be |
| M-15 | 15 | 40 mm | 38 mm | Száraz |
| M-40 | 40 | 40 mm | 38 mm | Száraz |
| MB-40 | 40 | 47 mm | 60 mm | Olaj |
| MB-60 | 60 | 47 mm | 60 mm | Olaj |
| MB-100 | 100 | 47 mm | 60 mm | Olaj |
| MB-250 | 250 | 58 mm | 75 mm | Olaj |
| MB-400 | 400 | 58 mm | 75 mm | Olaj |
| MB-600 | 600 | 58 mm | 75 mm | Olaj |
| MB-700 | 700 | 58 mm | 75 mm | Olaj |
Instructions
When using instruments, the upper limit should not exceed 3/4, and when measuring fluctuating pressure, the upper limit should not exceed 2/3. The minimum pressure should not be lower than 1/3 of the upper limit in both cases.
The instrument should be installed on the same horizontal line as the measuring point, with an ambient temperature of -20 ℃ -70 ℃ and a relative humidity not exceeding 80%.
