Description

Caractéristiques

For applications with changing temperatures, long-distance installation, such as vibration, confined spaces or hazardous environments, SMD is an option.
1. Transparent cover and transparent oil tank facilitate visual inspection.
2. The same drive unit can be used with two capacities, just adjust the 125/250 ml switch. The power supply can be a 24 VDC external power supply or a 3 VDC battery.
3. The discharge speed is independent of temperature and the extrusion pressure is up to 6.5bar.
4. The red-yellow-green LED lights indicate the status of the lubricator.
5. Can be used for close installation directly or connected to a pipe.
6. When the grease is exhausted, replace the cartridge and battery pack.
7. Applications in restricted and hazardous locations where reliability and additional monitoring are required.

Spécification

Lubrifiants : huile ou graisse ≤ NLGI #2
Capacité du réservoir : 125 ml et 250 ml
Temps de vidange : 0,5, 1, 3, 6, 9 et 12 mois
Plage de débit : 0,3 à 0,8 ml/jour
Température ambiante : -20~60℃
Pression de service : maximum 6,5 bar
Filetage de connexion : R1/4
Tube le plus long : 3 m pour la graisse, 5 m pour l'huile fine
Niveau de protection : IP65
Batterie : SMD1-BAT (2 CR17505 en parallèle)
Durée de stockage : 3 ans (20℃)
Poids de l'huile totale : 600 g (125 ml), 800 g (250 ml)

Applications

Rolling and Sliding Bearing Lubrication: These ensure smooth operation for the bearings in the high-risk environment.
Sliding Guide Lubrication: It is done with accuracy to decrease friction and wear.
Open Gear and Rack Lubrication: This keeps the lubrication intact under high pressure and high temperature.
Spindle and Shaft Seal Lubrication: This protects critical mechanical components and extends service life.
Chain lubrication: Prevents chains from rusting and wearing in harsh environments.
Motor lubrication: Especially suitable for electric motors that require precise lubrication quantities.

Manuels