MSK-9 Positive Displacement Injection Thin Oil Distributor

The Positive Displacement Jet Valve MSK is a jet valve used in a variety of industrial applications. It is designed to provide a precise spray of fluid. These valves are used for accurate and reliable fluid delivery, typically in lubrication systems.

Description

Fonctionnalité

Volume of Various Discharges: Can be availed with a difference in models, the stroke volume ranges from 0.03 to 0.5 ml.
Operate under High Pressures: Operating pressure could be as high as 1.0 MPa.
Quick Reset: Reset pressure is 0.3 MPa, enabling quicker recovery between cycles.

Construction: Distributor made of brass, hence robust and resistant to wear.
Maintenance-Friendly: Easy assembly and disassembly are designed to make maintenance as straightforward as possible, with minimum loss of production.
Corrosion Resistance: Construction materials ensure resistance to corrosion, enabling the valve to last long in adverse environments.
Customizable: The distributor is also available in various sizes and specifications that meet the different needs and requirements of any application.

Spécification

Principe de fonctionnement Injecteur volumétrique
Nombre de points de vente 1~12
Quantité de mesure 0,03, 0,05, 0,13, 0,20, 0,30, 0,50 ml/cycle
Lubrifiant 15-90 CSt@40℃
Température de fonctionnement -20 à +80 °C
Pression de service Minimum 1.0 MPa
Matériel Cuivre, aluminium
Prise de connexion Entrée Rc1/8, Sortie Φ4(Rc1/8)
Raccords de sortie Type de manchon, type rapide
Position de montage N'importe lequel

Testing

Visual Inspection: Inspect the injector and all of its connections for any signs of damage or leakage.
Pressure Test: Connect the injector to a pressure source and increase the pressure gradually to the operating level of 1.0 MPa. Look for leaks or other abnormalities.
Flow Test: Measure the volume discharged to verify that it falls within the range of 0.03 to 0.5 ml per stroke. This can be accomplished by utilizing a calibrated measuring device.
Reset Test: Check that the injector resets correctly at the set reset pressure of 0.3 MPa.
Operational Test: Run the injector through several cycles to ensure consistency in performance and check for any irregularities in operation.

Manuels