Bomba de lubricación con grasa accionada eléctricamente de 300 ml J100-3R
J100-3R is an electric pump for bearing and guideway lubrication of small machines, with built-in pressure relief function, equipped with manual additional lubrication cycle switch and optional level monitoring, with 2 outlets to serve two lubrication lines simultaneously.
Descripción
Características
– Intended Use: J100 lubrication pump for bearing and linear guide lubrication in small machinery, suitable to work with both oil and fluid grease.
– Inbuilt Pressure Relief Functionality: The pressure relief function integrated into the pump makes the J100 lubrication pump meet all the requirements of any single-line lubrication system pump.
– Power Requirements: It operates on 24V DC power supply. Control can be provided from a programmable PLC of the machine.
– Level Monitoring: Can be used with an optional level switch to monitor the level of either the oil tank or the grease cartridge.
– Compatibility: The J100 lubrication pump is compatible with NLGI 000 and 1# fluid grease grades.
– Outlet Design: The J100 lubrication pump has 2 outlets and can feed two lubrication lines simultaneously.
– Multiple Capacities: Available with refillable lubricant reservoirs from 0.3 to 1.5L, or 0.3 and 0.7L easily replaceable standard lubrication cartridges.
Especificación
| Modelo | J100-3R |
| Tiempo de lubricación | PLC o controlador externo |
| Tiempo de intervalo | PLC o controlador externo |
| Temperatura de funcionamiento | 0℃~ +50°C (Las condiciones de baja temperatura requieren grasa anticongelante) |
| Número de puntos de venta | 1 o 2 |
| Capacidad del depósito | 0,3 l, 0,5 l, 0,7 l, 1,5 l |
| Recarga | Puerto de llenado/extraíble/cartucho |
| Lubricante | Número de modelo NLGI 000#~2# |
| Válvula de alivio de presión | Opcional |
| Descargar | 15 ml/min |
| Presión máxima de funcionamiento | 8,0 MPa |
| Hilo de conexión | Salida Φ6 |
| Voltaje de funcionamiento | 24 V CC |
| Proceso de dar un título | CE |
| Interruptor de nivel bajo | Contacto NC |
Solicitud
– Machine tool industry: J100 is applied for lubrication of bearings and linear guides inside the machine tools to reduce wear and prolong the service life of the equipment.
– Packaging production line: In packaging machinery, J100 ensures good lubrication of bearings and moving parts to improve production efficiency.
– Automation equipment: Under the circumstance of precise control required for lubrication, the lubrication pump J100 can guarantee the reliability of the operating equipment in the automation production line or robot joint.
– Food and Beverage: Some food and beverage processing equipment require a special class of lubricating oil or grease, to which the J100 series can adapt easily.
