FZA 1-14 Outlet 315bar Multi-Point Electric Lubrication Pump
FZ-A is an electric multi-point lubrication pump that can service up to 14 lubrication points. It has rugged components and a grease agitator to ensure continuous grease delivery. It has multiple discharge capacities and can handle oils and greases up to NLGI 000-2.
Description
Feature
The pump is suitable for multi line lubrication systems with low lubrication frequency, lubrication points below 50 points, and nominal pressure of 31.5MPa. It is a device that directly or through a single line distributor supplies lubricating grease to the lubrication points. Especially suitable for single machine equipment such as metallurgy, mining, heavy machinery, port transportation construction, etc.
Specification
| Operating temperature | (-20 ~ +80 ℃) |
| Number of outlets | 1~14 |
| Reservoir capacity | 10L, 20L, 30L |
| Refilling | Hydraulic lubrication fitting |
| Lubricant | Grease NLGI 0 #~2 #, Oil ≥ N68 |
| Class of protection | IP6K 9K |
| Discharge | 1.8, 3.5, 5.8, 10.5, 25 mL/min |
| Max. operating pressure | 315 bar |
| Connection thread | M14*1 (Φ8) |
| Operating voltage | 380 VAC |
| Working speed | 22 cycles/min |
Application
1. This type of multi-point lubrication pump should be installed in a location with suitable ambient temperature, low dust, easy inspection, maintenance, and convenient grease replenishment.
2. Adding grease to the reservoir must be done through the filling port of the reservoir using a refilling pump, and it is strictly prohibited to remove the cover and add unfiltered lubricant.
3. Connect the motor according to the rotation direction indicated on the oil storage container wall, and do not reverse it.
4. The number of oil ports can be freely selected within the range of 1-14. Depending on the equipment requirements, the pressure plunger pump components that are not needed can be removed by themselves, and the screw holes can be sealed with M20x1.5 plugs.
